Certification Resource Links
This page is currently being built. If you know of any
online resources that might help certificate candidates, please email
.
Thanks!
Environmental Compliance
Inspector
Federal Water Regulations
40
CFR 403 General Pretreatment Regulations
40 CFR 122.6 Storm Water Discharges
Industrial User Permitting Guidance Manual (EPA)
40 CFR 433 Metal Finishing Point Source Category (PDF--Requires Adobe
Acrobat Reader)
Clean Water Act
Search the Clean Water Act
Sec. 1317. (FWPA Sec. 307) Toxic and Pretreatment Effluent Standards
Sec. 1342.
(FWPCA Sec. 402) National Pollutant Discharge Elimination System
Collection System Maintenance
Cal Trans Manual of Traffic Controls
Manual
of Traffic Controls for Construction and Maintenance Work Zones (1996)
(PDF--Requires Adobe
Acrobat Reader)
Mathematics for Collection System Operators, a Workshop Manual, OCT
Mechanical Technology
Books including Audel's
Mechanical Trades Pocket Manual
Maintenance Troubleshooting
Electrical/Instrumentation
OSHA Regulations
29 CFR 1910.147 The control of hazardous energy (lockout/tagout)
29 CFR 1910.333(b) Working on or near exposed deenergized parts
ISA--2001 -
Standards Library for Measurement and Control
Instrumentation,
Systems, and Automation Society Online Store
Entire
ANSI/ISA Numerical Standards Listing (PDF--Requires
Adobe
Acrobat Reader)
Individuals preparing for the test should
use the Electrical/Instrumentation Study Guide for their grade level to
determine specific standards to be studied. Then, using the Instrumentation,
Systems, and Automation Society web site at www.isa.org,
research the relevant standards. ISA subscribers can view standards online. For
more information, visit the ISA
standards subscription web page.
Recommended ISA Standards for Electrical/Instrumentation Grades II and III
Study
Minimally, certificate candidates should be
familiar with the relevant standards, as outlined by the skill sets given in the
study guides, and covered in the following standards:
ANSI/ISA-5.1-1984 (R1992) Instrumentation Symbols and Identification
ANSI/ISA-5.2-1976
(R1992) Binary Logic Diagrams for Process Operations
ANSI/ISA-5.4-1991
Instrument Loop Diagrams
ANSI/ISA-5.5-1985
Graphic Symbols for Process Displays
ANSI/ISA-12.12-1994
Nonincendive Electrical Equipment...
ANSI/ISA-18.1-1979
(R1992) Annunciator Sequences and Specifications
ANSI/ISA-37.1-1975
(R1982) Electrical Transducer Nomenclature and Terminology
ANSI/ISA-50.1-1982
(R1992) Compatibility of Analog Signals for Electronic Industrial Process
Instruments
ANSI/ISA-51.1-1979
(R1993) Process Instrumentation Terminology
Laboratory Analyst
Periodic Table of Elements
Los
Alamos National Laboratory Interactive Periodic Table
ChemicalElements.com
Books
Water and Wastewater Laboratory Techniques
Standard
Methods for the Examination of Water and Wastewater - 20th Edition
For more info visit http://www.standardmethods.org/
Used copies may be available at Amazon.com
Handbook
for Analytical Quality Control in Water and Wastewater Laboratories
(EPA 600/8-78-019 or NTIS PB-290329)
Operation of Wastewater Treatment Plants, A
Field Study Training Program
Volume I
Volume II
CWEA Laboratory Analyst Candidate Handbook [PDF]
Lectures
on Wastewater Analysis and Interpretation
Laboratory
Safety Pocket Handbook
EPA Methods
EPA Publication Titles Sorted by Publication Number
Method 375.4 can be found in:
600-4-79-020
Methods for Chemical Analysis of Water and Wastes
Microbiological Methods for Monitoring the
Environment: Water and Wastes Can be found at:
National Technical Information Service
Environmental Protection Agency
Other
Genium
Wastewater Laboratory Analyst Certification Exam Practice Questions